Products by Car

Vehicle Specific Upgrades
Product Code: Helix M SIX
Availability: In Stock
DescriptionReviews (0)

Helix M SIX 6 Channel Amp 1200W Max

One for all – no matter if 3-way, 2-way or subwoofer application, the 6-channel amplifier M SIX will always be the right choice.

With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp really gets your speaker cones going despite its super-compact dimensions. On the other hand the M SIX stays totally cool thanks to its highly efficient Class D design topology. And even bridged configurations are possible, delivering up to 3 x 200 Watts RMS of clean and undistorted output power.

In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. And finally the perfect sound tuning is no big deal thanks to its integrated crossover with all its setup options.

Class-D RCA-Input Active crossover Start-Stop-Capability SMD Ultra compact dimensions

Core Features:

  • Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load
  • Start-Stop capability down to 6V supply voltage
  • 6-channel lowlevel input
  • Integrated, active crossover with highpass, lowpass, bandpass and subsonic
  • “Input mode” switch for channel E & F for flexible input signal routing
  • SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability
  • Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Special features:

Start-Stop capability

The switched power supply of the HELIX M SIX assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.

Technical Specs

Output power RMS/max. 
- @ 4 Ohms6 x 100 / 200 Watts
- @ 2 Ohms6 x 100 / 200 Watts
- @ 1 Ohm-
- bridged @ 4 Ohms3 x 200 / 400 Watts
- bridged @ 2 Ohms
Amplifier technologyClass D
Inputs6 x RCA / Cinch
1 x Remote In
Input sensitivityRCA / Cinch 0.5 - 6 Volts
Input impedance RCA / Cinch20 kOhms
Input impedance highlevel
Outputs6 x Speaker output
Output voltage RCA / Cinch
Signal converter for digital input
Frequency response10 Hz - 30,000 Hz
Bass boost
Highpass15 Hz - 4,000 Hz adjustable
Lowpass40 Hz - 4,000 Hz adjustable
Bandpass15 Hz - 4,000 Hz adjustable
Subsonic / HPF
15 Hz - 4,000 Hz adjustable
Slope high- / lowpass12 dB/Oct.
Slope subsonic / lowpass
Signal-to-noise ratio digital input
Signal-to-noise ratio analog input98 dB (A-weighted)
Distortion (THD)0.05 %
Damping factor100
Operating voltage10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current1,550 mA
Fuse2 x 35 A Maxi-fuse (APX)
Additional featuresActive, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capability
Dimensions (H x W x D)

50 x 320 x 154 mm /
2.00 x 12.60 x 6.06”

Image result for helix audio logo

Product Review

Note: HTML is not translated!