Products by Car

Vehicle Specific Upgrades
Product Code: C3-650
Availability: In Stock
£399.99
DescriptionReviews (0)

JL Audio Evolution C3-650 6.5" Component/Coaxial Speakers 150W MAX

JL Audio's Evolution C3 speaker systems allow you to choose the best configuration for great sound in your vehicle. Mount the woofers and tweeters separately, and a C3 component system will fill your car with incredibly detailed, rich, and crystal-clear music, perfectly positioned in your listening space. In vehicles with limited space, you can mount the C3 tweeter inside the woofer to create a full-range, coaxial speaker that still performs with breathtaking impact.

The C3-650 component system uses a 6-1/2" mica-filled polypropylene woofer that covers the midrange and low frequencies strongly and accurately. A specially designed frame resists unwanted resonances, keeping your music free from interference. If you mount the tweeter separately, simply install a phase plug into the woofer and the sound will disperse smoothly throughout your vehicle.

The C3 tweeters use ferrofluid cooling to handle extreme levels of high-frequency information without overheating. Mounted separately or coaxially, these 1" silk dome tweeters broadcast crisp musical detail evenly without harshness. Separate, outboard crossovers use premium components to direct the signal flow to your woofers and tweeters. You can select from three midrange settings and four levels of tweeter presence to match the speaker system to your listening environment.

Core Features:

Woofer Specifications

  • 150W Max power
  • 75W RMS Power
  • Convertible Config (Component or Coax)
  • Mineral-filled Polypropylene cone
  • Injection-molded Polymer frame
  • Patented elevated frame cooling
  • Butyl rubber surround
  • Patented elevated frame
  • DMA-optimized motor system
  • Injection-molded, mica-filled, Polypropylene cone
  • 1.2" Kapton former voice coil
  • Low profile, symmetrical roll spider
  • Ferrite magnet structure
  • Frame Outer Diameter (A) 6.50 in / 165 mm
  • Grille Tray Outer Diameter (B) 6.74 in / 171 mm
  • Rear Cover Outer Diameter (C) 4.08 in / 104 mm
  • Frontal Coaxial Tweeter Protrusion* (D) 0.75 in / 19 mm
  • Frontal Grille Protrusion** (E) 1.03 in / 26 mm
  • Mounting Hole Diameter (F) 5.56 in / 141 mm
  • Mounting Depth (G) 2.55 in / 65 mm

Tweeter Features

  • 1" Silk soft dome tweeter
  • FerroFluid cooling and damping
  • Neodymium magnet structure
  • Fixed Angle flush-mount
  • Surface-mount and coaxial-mount systems
  • Flush Mount Fixture Diameter (A1) 2.12 in / 54 mm
  • Surface Mount Fixture Diameter (A2) 1.93 in / 49 mm
  • Flush Mount Mounting Hole Diameter (B) 1.875 in / 48 mm
  • Flush Mount Fixture Mounting Depth (C) 0.71 in / 18 mm
  • Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm
  • Surface Mount Tweeter Frontal Protrusion (D2) 0.95 in / 24 mm

Crossover Features

  • 4-Position adjustable tweeter level
  • 3-Position adjustable midrange presence
  • Polyswitch protection
  • Premium Mylar capacitors
  • Premium air-core inductors
  • 1st Order low-pass filter
  • 2nd Order high-pass filter
  • Width (W) 3.36 in / 85 mm
  • Height (H) 1.44 in / 37 mm
  • Depth (D) 4.72 in / 120 mm

Package Includes

  • Two 6-1/2" Woofers
  • Two 1" Tweeters
  • Two Crossover Networks
  • Two Surface Mount Tweeter Fixtures
  • Two Coaxial Mount Tweeter Fixtures
  • Two Flush Mount Tweeter Fixtures
  • Two Metal Spring Clips for Tweeter Fixtures
  • Two Metal Mesh Woofer Grilles with ABS Grill Tray
  • Various Terminals and fixings

Related image

Product Review

Note: HTML is not translated!